Enabling/Disabling Upnp; Controlling Your Hercules Modem Router From A Remote Location Via The Internet - Hercules HWGADSL2P-54V2 Manual

HWGADSL2P-54V2 AnnexA

6.4.3. Enabling/Disabling UPnP

The UPnP (Universal Plug n' Play) function, when enabled, allows the computers in your network which use
this technology to detect and execute the services available on the network (Internet communications,
multimedia server...).
To access the UPnP function:
6.4.4. Controlling your Hercules Modem Router from a remote
location via the Internet
WiFi Manager's Control from a remote location function allows a computer outside of your local network to
connect to the Hercules Modem Router and configure it.
To authorize remote control of your Modem Router:
To access your Modem Router remotely, you must enter your ADSL connection's public IP address,
established by your ISP, in the Internet browser of the remote computer.
To find out your public IP address, open the Your ADSL connection window (click the Your ADSL
connection button on the Home page). The IP address is displayed in the lower right-hand corner.
Hercules ADSL2/2+ Wireless G Modem Router
- On the Home page, click the Advanced settings
button.
- Select UPnP.
- On the Home page, click the Advanced
settings button.
- Select Control from a remote location.
- Tick the Remote control enabled box.
- Enter the IP address of the remote computer
that will access the Modem Router.
- Click the Apply and Save button to validate
your settings.
User Manual – 105/113