Central Control Unit; Introduction; Control And Indicators - Televic Confidea Installation And User Manual

Confidea Wired System
8.

Central Control unit

8.1. Introduction

The Confidea CU is the heart of the system. It
controls all delegate units and can interconnect to
other systems either via the external audio
connections or control ports (camera control, control
panel)
The system has a built in power supply to drive 120
units and can operate in a standalone mode.
Initialization and configuration can be done via the
integrated menu. Optionally, this can also be done
via additional software suite.
In case a larger number of units are required the
systems can be extended with multiple control units
in a master/slave configuration. The maximum
number of units is 1024.
The central control units can be used for any type of
application, from discussion over voting to
simultaneous interpretation. The control unit
supports 4 languages as a standard, but can go up to
28 languages via additional licenses (Floor + 8, Floor
+ 28).

8.2. Control and indicators

The control unit has the following features:
1. LCD display
2. F1 menu button
3. F2 menu button
4. F3 menu button
5. Scroll wheel
6. EXIT menu button
7. ENTER menu button
8. XLR 3F balanced input (AUX IN1)
9. XLR 3F balanced input (AUX IN2)
Televic Conference Systems
10. XLR 3M balanced output (AUX OUT)
11. RJ-45 shielded connector (MASTER OUT) for a
connection with a slave central unit when the
central unit is master in a coupled environment
or to connect conference units with an external
power supply.
12. RJ-45 shielded connectors (SLAVE IN) for a
connection with a master central unit when the
central unit is a slave in a coupled environment.
13. RJ-45 shielded connectors (SLAVE OUT) for a
connection with a slave central unit when the
central unit is already a slave in coupled
environment or to connect conference units
with an external power supply.
14. RJ45 DATA OUT connector:
Connection to optional AOP2500 output panel
15. SUBD15 output connector:
6 unbalanced controllable audio outputs to be
used to connect to recording equipment,
language distribution, ...
16. COM 1 serial communications port to connect a
PC. When connected with a PC, all the data
related with the interpreter system flows over
this connection. The COM port operates at a
speed of 19200 bits per second.
17. COM2 serial communication port:
Connection to camera control system (refer to
Camera Control Protocol ) or control panel (refer
to Control Panel Protocol )
18. COM 3 serial communication port:
Control of a PC with microphone, delegate,
voting management software.
19. Port 1-6:
Digital bus connection to connect contribution
units and interpreter desks.
20. Power supply fan
21. Mains plug connector
22. Power switch
23. Fuse holder
2011-11-14
Installation and User Manual
42