Avoiding Interference B.m.o. Wifi Collection Points; Adding Cocon License To The Wcap; Introduction; Get The Mac Address Of Your Central Equipment - Televic confidea Installation & User Manual

Hide thumbs Also See for confidea:

Table of Contents

9.2 Avoiding interference b.m.o. wifi collection points

The transmission mode between WDU's and WCAP is specially designed to be used in very challenging

environments where a high density of wifi signals is present due to wifi access points as well as so called

smart devices , which may cause RF interferences

Wifi devices such as smartphones , I-Pads..... may send regular probing signals over the entire wifi

band to search for a wifi connection. This probing can cause temporary interference and will continue until

a wifi connection was established. When a large number of wifi devices is present in the room , these

probing signals may cause WDU connection loss due to saturation of the used frequency .

Therefore it is strongly recommended that a wifi collection point is set up, so wifi devices can lock on

to them and this way reduce further the risk of interference.

Note : The wifi access points must have sufficient capacity to ensure wifi connection for all

present wifi devices .

If there is not a sufficient wifi connection capacity for the present mobile wifi devices ,

unstable functionality of the Confidea wireless system due to interference can not be

excluded !

With the release of Confidea Gen 3 we've changed the CoCon license file location from the PC where

the Room Server is installed, to the device to which CoCon will be connecting. This means that now you

do not need to send us the MAC address of your PC but the MAC address of your Confidea Gen 3 Access

Point. This way the license is independent of the computer onto which the CoCon Room Server is running,

the license will allow only 1 concurrent connection and the software will adapt automatically to the license

modules which are active in the license file.

To obtain the MAC address of the Confidea Gen 3 WCAP please follow the procedure underneath.

The default IP address Confidea Gen 3 WCAP is 192.168.1.100. Please use a recent web browser to

browse to the addresses indicated. If it's the first time you set up your device a small wizard will appear to

set your language and etc.

You can login using username "admin" and password "admin". (Yes, we've been very creative this

time...). Then go to the settings page:

Table of Contents