Thermador KBULT3655E Installation Instructions Manual page 6

42" (106.7 cm) Models
Illllllllllllll_lllllllllllllllllllll
_-_ 421/4'' (107.3 cm)_
.833/8"
(211,8 cm)
_'L
*When leveling legs are fully extended to 11/4"(3.2 cm) below
rollers, add 11/s"(2.9 cm) to the height dimensions.
'l" "
"!
Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
• The dolly wheel height must be added to the tipping radius
when a dolly is used.
• If needed, the tipping radius can be reduced. See "Reduce
Tipping Radius."
Side Tipping Radius
.J ii
1
1
/
jl
/
/
i
/
/
!
/ 9ova"
_ (229,9 cm) ................................................................................... '
A. Tip this side only
The location must permit the door to open to a minimum of 90 °.
Allow 41/2 '' (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels, custom handles, or extended handles on a Classic
model.
To adjust the door swing, see "Adjust Doors."
36" (91.4 cm) Models
23"
_. (58cm)
'\ \ \
51 _
(130 cm)
59 II
(150cm)