Thermador KBUIT4255E Installation Instructions Manual page 7

Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
• The dolly wheel height must be added to the tipping radius
when a dolly is used.
• If needed, the tipping radius can be reduced. See "Reduce
Tipping Radius."
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
NOTE: Tip on side only.
//_j [
/
//
/
/
//
/
//
/
/
//
/
/
/
/
J
n n
Model Tipping Radius A
42" (106 cm) 93" (236.2 cm)
48" (122 cm) 96" (243.8 cm)
The location must permit both doors to open to a minimum of 90 °.
Allow 4V2" (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels or custom handles.
To adjust the door swing, see "Adjust Doors."
42" (106 cm) Models
125/8 ''
(32.1 cm)
f
371/4"
(94.6 cm)
41%"
(105.1 cm)l _
+
411/2"
(105.4 cm ',
<--- 167/8,, --_,,.
(42.9 cm)
477/8"
(121.6 cm)
48" (122 cm) Models
143/8 ''
(36.5 cm)
+
44"
(111.8 cm
51_/_ ''
(130.5 cm)