Agilent Technologies 54641A Service Manual page 22

* Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and
±10 °C from firmware calibration temperature.
FFT
Points
Source of FFT
Window
Noise Floor
Amplitude Display
Frequency Resolution:
Maximum Frequency
Storage
Save/Recall (non-volatile)
Floppy Disk
Image formats
Data formats
Trace/setup formats
I/O
RS-232 (serial) standard port
Parallel standard port
Printer Compatibility
Optional GPIB Interface Module
General Information
FFT
Fixed at 2048 points
Analog channels 1 or 2, 1+2, 1-2, 1*2
Rectangular, Flattop, Hanning
-70 to -100 dB depending on averaging
In dBV, dBm @ 50 ohm
0.097656/(time per div)
102.4/(time per div)
4 setups and traces can be saved and recalled internally
3.5" 1.44 MB double density
TIF, BMP
X and Y (time/voltage) values in CSV format
Recalled
1 port; XON or DTR; 8 data bits; 1 stop bits; parity=none; 9600, 19200, 38400, 57600 baud
rates
Printer support
HP DeskJet, HP LaserJet with HP PCL 3 or greater compatibility
Compatibility– black and white @150x150 dpi
gray scale @ 600x600 dpi
Epson–black and white @180x180 dpi
Seiko–DPU-414 black and white
Fully programmable with IEEE488.2 compliance
Typical GPIB throughput of 20 measurements or twenty 2000-point records per second.