Download Print this page

Moving The Range - Whirlpool YGW395LEGB4 Installation Instructions Manual

30" slide-in gas range

Advertisement

if range does not
operate;
[_ Check that the circuit breaker is
not tripped
or the house fuse
blown.
[_ Check that the power suppUy cord
is pUugged into the outlet.
[_ Check that the gas Uine is on.
[_ See Use and Care Guide for
troubbshoofing
Uist.
mfyou need
if you have questions
about operating,
cleaning
or maintaining
your range:
[_ Refer to Use and Care Guide.
[_ Call the Consumer
Assistance
Center. Check your Use and Care
Guide for a tolPfree number
to call
or call the dealer from whom you
purchased this appliance.The
dealer
is listed in theYellovv
Pages of your
phone directory
under "Appliances
-- Household
--
Major -- Service and Repair:'
mfyou need
m
service:
Maintain
the quality built into your
range by calling an authorized
service company.
To obtain the name and number
of
the authorized
service company:
[_ Contact the dealer from whom
you purchased your range; or
[_ Look in theYellow
Pages of your
telephone
directory
under
"Appliances-
Household
--
Major -- Service and Repair;" or
[_ Call the Consumer
Assistance
Center.The
tolPfree number
is
listed in your Use and Care
Guide.
When
you call, you will
need:
[_ The range
model
number.
[_ The range
serial
number.
Both
numbers
are listed
on the
model/serial
rating
plate
located
on
the oven
frame
behind
the storage
drawer
panel.
Moving the range:
Tip Over Hazard
A child or adult can tip the range
and be killed.
Connect
anti=tip bracket to rear
range foot.
Reconnect
the anti=tip bracket, if
the range is moved.
Failure to follow these instructions
can result in death or serious
burns
to children
and adults.
When moving
range, slide range
onto cardboard
or hardboard
to
prevent damaging
the floor covering.
if removing
the range is necessary
for cleaning
or maintenance:
1. Disconnect
the electrical
supply.
2. Slide range forward
to complete
cleaning
or maintenance.
3. Make sure the anti-tip
bracket is
installed.
o Look for the anti-tip
bracket
securely attached to floor.
o Slide range back so rear range
foot is under anti-tip
bracket.
4. Check that range is level.
5. Reconnect the electrical
supply.
Part No. 9753052 Rev. B
@ 2003 Whirlpool Corporation
Benton Harbor, Michigan 49022
Printed in U.S.A.

Advertisement

loading