Table of Contents
Advertisement
4. When name entry is finished, push
the phone number entry and make a correction.
5. Push
again to save the record.
6. Select a tone type and press
g.
cAller iDentificAtion memory (cAller iD)
If Caller ID service is available from your service operator and you have subscribed
to this service, the telephone number of the caller will be shown on the screens of
handset when there is an incoming call. In FSK caller ID system, name of the caller and
date time stamp will also be displayed and stored if they are available. Only the first 13
letters of the caller's name are displayed.
This DECT phone stores the last 30 Caller ID records into the Caller ID memory. It can
store up to 4 digits long and names up to 13 characters long. The oldest record will
be replaced by the newest record. If the caller has withheld their listing, "Unavailable"
or "Private" will be displayed or, if the number is unavailable the display will show
"Unavailable". You will not be able to dial back an entry with one of these messages.
call waiting tone
This model has a special call waiting tone in addition to the one you typically hear
from your local service provider. This tone will be heard after the standard tone when
you receive a call waiting notification. This tone is provided as an extra feature and
will have to be turned on in order to activate as the default setting is set to "Off".
To turn this feature on, go to the menu, select "Audio Setting", "Tones", and "Call
Waiting" – then set the feature to "On". When activated you can toggle between calls
by pressing
flash
.
g.1. to review caller iD records
Caller ID records can be reviewed at only one handset at a time because the records
are only stored in the base unit.
To review Caller ID records in the handset, press
Use
/
to scroll among records, or press
standby.
14
. You may use
to delete numbers of
and select the "Call Log List".
to exit and return to
g.2. to make a call from caller iD records
You may make a call from the Caller ID records. Press
List". Push
on the handset to dial the desired caller's number (or name) when
reviewing Caller ID records.
g.3. caller iD number conversion
Use
to add or remove the stored area code. Select between 7 - 8 - 10 - 11 digits
for storing or recall.
g.4. to store a number from caller iD records to phone Book memory
You may store a number from the Caller ID record to a new Phone Book memory.
Please refer to f. pHone Book section for details.
g.5. to delete caller iD memory
You may delete either a single or all records in the Caller ID memory.
On the handset
1. Press
and select the "Call Log List". Use
desired entry you intend to delete. If you want to delete all entries, skip this step.
. Press
to select "Erase Entry" or "Erase List".
3. Press
to select "Yes" or "No". Then press
g.6. message Waiting indicator (mWi)
If Voice Message service is available from your service operator and you have
subscribed to this service, the symbol of Message Waiting
screen when a voice message is left in your message box registered with the telephone
operator.
Depending on your service operator's service, Message Waiting Indicator should turn
off automatically when you have checked your left message in the operator's server.
H.
personAlizing your pHone
This DECT phone is built with features to offer you personalized settings, such as ringer
type, ringing volume, key click and key lock.
Referring to the description of the MENU button in previous section, all these
personalized settings can be programmed via Menu Programming mode.
and select the "Call Log
/
to scroll and select the
to confirm.
will be shown on the
Hide quick links:
Advertisement
Table of Contents
