Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jacob Jensen 80
Summary of Contents for Jacob Jensen 80
- Page 1 Telephone 80 DECT User manual Generation to generation… JACOB JENSEN...
- Page 2 Accessories & contents The following items are included in the package of JACOB JENSEN Telephone 80, with country adaptor (optional): Telephone Handset Base Station Wall mount plate + screws and plugs Power supply unit Li-ion 3.7V 650mAh Battery Combo jack...
- Page 3 • LCD type, 14 digit X 3 line + icons materials. • Flash selectable 80-800 ms • Young children should be supervised to ensure that they do • Caller ID Type 1& and DTMF not play with the telephone.
-
Page 4: Table Of Contents
ADVAnceD operAtion ........15 The Telephone 80 is equipped with a low radiation feature in both the base and the reVerting to fActory DefAult setting. - Page 5 1. Connect the combo cord to the RJ45 jack of the combo jack. A.1. Wall mounting 1. If you desire wall mounting, replace the desktop cover with the wall mounting plate. Mount the plate using the enclosed screws and plugs for 6 mm drill. Caution •...
-
Page 6: Display Symbols And Their Indication
3. Put the handset into the base unit, according to the picture shown below. Make 3. Observe polarity marks inside the battery compartment, and insert the rechargeable sure that the LED charge indicator on the base unit lights up to show charging is in battery. -
Page 7: Buttons And Their Functions
symbol indication Buttons AnD tHeir functions Battery fully charged. Before going through the following keypad functions, it is a good idea to understand Battery half charged. that multiple functions may be assigned to a single button in order to reduce buttons cluster. - Page 8 Button in standby mode in conversation mode in programming / Button in standby mode in conversation mode in programming / viewing mode viewing mode In standby mode, a In conversation mode, In programming & Press to end a call. short push to this this button functions memory review mode, Press to exit the menu...
-
Page 9: Preparation Before Use
prepArAtion Before use time for use of this DECT phone in countries with FSK caller ID system as the date/time information will be received automatically from the caller ID signal. Attention For use in countries with DTMF caller ID system (or countries with FSK system where Your DECT phone is protected by PINs (personal identification numbers). - Page 10 D.6. sound enhancer D.9. Handset name Key Map: Key Map: soundenhancer select the tone options Display Handset name enter the handset name You can adjust the Audio Tone of the earpiece. Your phone gives you four audio tone options: Normal, Bass, Alto, or Treble. You can change the name your phone displays on the screen.
-
Page 11: Normal Operation
4. Press to select the option (i.e. “Warning”, “Call waiting”, “Range Key Map: Alarm”) and to confirm. setting Base Additional prefix Dial enter 5. Press to display either “On” or “Off” and press to confirm. For the number “Key”, select from “pattern 1-3” or “Off” and press 6. - Page 12 3. Press to exit and return to standby mode. e.6. to page all handsets from the base You can only page all registered handsets at the same time by pushing the PAGE e.2. Hands-free operation from the base button on the base unit. If you have misplaced your handset, you may also use the When the handset is placed in the base you have a unique feature enabling you to PAGE function from the base unit to make a page ring at the handset.
-
Page 13: Phone Book
pHone Book 3. If necessary, you can edit the number using to delete any incorrect digits and enter new ones using the keypad. There are 100 phone book memory banks built inside this DECT phone (13 characters 4. Press to select a distinctive ring. &... -
Page 14: Caller Identification Memory (Caller Id)
4. When name entry is finished, push . You may use to delete numbers of g.2. to make a call from caller iD records the phone number entry and make a correction. You may make a call from the Caller ID records. Press and select the “Call Log 5. -
Page 15: Advanced Operation
H.1. setting ringer Volume & ringer type i.1. to register a new handset Different ringer volumes and ringer types can be programmed to each handset. When you register a new handset to your base, you will be asked to enter your base PIN code. -
Page 16: Reverting To Factory Default Setting
Key Map: If you have more than one handset registered to your base and you complete the Add. settings Deregister select the handset or base following procedure, only the handset you reset and the base will go back to the select yes default settings. -
Page 17: Maintenance
mAintenAnce my phone does not ring! Check if the ringing volume is set to “Off” (Refer to H.1. setting ringer Volume & • Do not expose this product to dust, strong sunlight, humidity, high temperature, or ringer type). Your phone will not ring if the ringing volume is set to “Off”. Change the ringing volume to higher setting ranges. -
Page 18: Warranty And Services
WArrAnty AnD serVices • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. Warranty • Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. The warranty is the only warranty applicable to this product. All other warranties, express •... - Page 19 The individual number below matches the one on your telephone. installation instructions for details. d) The REN of Telephone 80 is 0.0. It is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the Individual No.:...
- Page 20 Product by: Bell Xpress A/S · Sletvej 50 · 8310 Tranbjerg J · Denmark www.jacobjensen.com...
Need help?
Do you have a question about the 80 and is the answer not in the manual?
Questions and answers