Phone Book - Jacob Jensen 80 User Manual

f.

pHone Book

There are 100 phone book memory banks built inside this DECT phone (13 characters
& 4 digits). You may store frequently used numbers into these memory banks.
If more than one handset comes with your product package (refer to information on
the package), the phone book memories are independent among the handsets. The
phone book memory will not be automatically transferred from one handset to the
others.
f.1. to make a new entry
Key Map:
phone book new entry
1. Use the alphanumeric buttons ( to 9) to enter a name for the record in the same
manner as you manage alphabet input from your mobile phone. Push
to confirm. Press to delete an incorrect letter.
If you enter a letter and the next letter is on the same button, press
the cursor to the right or wait three seconds for the cursor to move. To switch
between upper and lower case, press
. Use the numeric buttons to enter phone number (timed pause can be inserted inside
telephone number after connected to a PABX. Press and hold
shows P), push again to save the record. Press
letter.
3. Press to select a tone type and press
4. Press to select "Store" or "Back" and press
5. The phonebook entry is now stored. Press
f.2. to make a new entry from caller iD memory and redial list
You may copy a number stored in the Caller ID memory and the Redial list to the
Phone Book. (Consult sections of Caller ID and Last Number Redial for more details)
1. When a desired number is shown while you are reviewing caller ID memory or redial
list, push once. "Save to Phb." is displayed. Press
the keypad and press to confirm.
If you enter a name that is already stored in the phonebook, you will be prompted
to enter another name.
. The number is displayed. To confirm and save the entry to the phone book, press
to confirm.
<enter name>
again
to move
.
until the display
to delete an incorrect
to confirm.
to confirm.
to return to standby model.
. Enter a name using
3. If necessary, you can edit the number using
enter new ones using the keypad.
4. Press / to select a distinctive ring.
5. When finished, push again to complete.
6. Press to exit and return to standby mode.
To add/remove area code, please see section g.3. caller iD number conversion.
f.3. to make a call from the phone Book memory
Key Map:
/ to select number
1. Use the alphanumeric keypad to enter the first letter of a desired name inside the
phone book. First record starting with the entered letter will be shown on the
screen.
. Use / to start browsing until desired name is shown.
3. Push to make the call.
f.4. to delete the phone Book memory
Key Map:
/ to select number
1. Use / to scroll until the desired name is shown on the screen.
. Push to confirm or press
deleting. You will be asked to confirm permanent deletion of phone book record.
To confirm, push again and the selected phone book record is deleted and a
long beep will be heard.
f.5. to change the phone Book memory
Key Map:
/ to select number
to enter the correct letters
1. Use / to scroll until desired name is shown on the screen.
. Push to confirm.
3. You may use to delete letters of the name entry and make a correction.
to delete any incorrect digits and
erase entry
to go back to the menu screen without
edit Numeric keypad
yes
13