Download Print this page

Whirlpool GS440LEMT2 Installation Instructions And Operation Manual page 12

30" (76.2 cm) freestanding gas ranges

Advertisement

Available languages

Available languages

i!_:q?iiiiiii!_£e
{}i_i,_,:x!:,¢:/!!_i,ii_i_!:!{iii:s
& S_ixi,_iii_!i@_i:i_
ei_i_
¸¸ ' _i:_'_!ii_i_'s:?isiiiii_s{iill
il}ii_s,:_:,,i,i!!_!_
Replace oven racks in oven cavity, insert storage drawer or
warming drawer into slide rails on sides of drawer opening. Lift
front of drawer slightly and push firmly to close drawer.
1. Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.
2. Check to be sure you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. Check to be sure the range is level. See "Level Range."
5. Use a mild solution of liquid household cleaner and warm
water to remove waxy residue caused by protective shipping
material. Dry thoroughly with a soft cloth. For more
information, see the "Range Care" section of the Use and
Care Guide,
6. Read "Range Use" in the range Use and Care Guide.
7. Plug into a grounded 8 prong outlet.
8. Turn on surface burners and oven, See your Use and Care
Guide for specific instruction on range operation,
If range does not operate,
check the following:
[]
Household fuse is intact and tight; or circuit breaker has not
tripped.
[]
Range is plugged into a grounded 3 prong outlet.
[]
Electrical supply is connected.
[]
See "Troubleshooting"
in your Use and Care Guide.
9. When the range has been on for 5 minutes, feel for heat. If
you do not feel heat, turn the range off and check to see that
the gas supply Iine shutoff valve is open.
[] If the gas supply Iine shutoff valve is closed, open it, then
repeat the 5-minute test as outlined above.
[] If the gas supply Iine shutoff valve is open, contact a
qualified technician.
12

Advertisement

loading

This manual is also suitable for:

Gs440lemb1Gs440lemq2Gs440lemb2Gs440lemt1Gs440lemq1