Reset Procedures; Data Dump Mode; Demo Songs - Johannus Opus 15 User Manual

4.11.7

Reset Procedures

The Reset Procedures function is used to delete the capture memory, or to
reset a number of settings to the factory settings.
1. Push the MENU piston in.
2. Use the - and + pistons to select the Reset Procedures function on
the display.
3. Push the SET piston in. The display shows the menu for the Reset
Procedures.
4. Use the - and + pistons to select the desired procedure.
5. Push the SET piston in. The display requests confirmation.
6. Use the - and + pistons for No or Yes.
7. Push the SET piston in for confirmation.
8. Press the MENU piston in to return to the main menu.
9. Press the MENU piston in again to exit the Easy Menu.
4.11.8

Data Dump Mode

The Data Dump Mode function sends settings from the organ to a storage
medium (for example a sequencer) through the MIDI SEQ. output. See
3.5.
1. Push the MENU piston in.
2. Use the - and + pistons to select the Data Dump Mode function on the
display.
3. Push the SET piston in. The Press Set piston text appears on the
display.
4. Make sure the desired storage medium is properly connected.
5. Push the SET piston in again. When data is being sent, Sending data
appears on the display.
6. Press the MENU piston in to return to the main menu.
7. Press the MENU piston in again to exit the Easy Menu.
4.11.9

Demo Songs

The Demo Songs function plays twelve different demo songs.
Memory: Clear the entire capture memory.
MIDI: Resets the factory settings of the MIDI stops.
Preset: Resets the factory settings of the fixed combinations.
Crescendo (option): Resets the factory settings of the General
Crescendo.
Do not use the organ when the text Sending Data is on the
display.
§
21