Easy Menu - Johannus Opus 15 User Manual

4.11

Easy Menu

16
Calling up a preprogrammed memory location
1. Press a preprogrammed memory location (PP-T) in. The active stops
light up.
Programming a preprogrammed memory location
The current setting of the preprogrammed memory location will be
lost.
The programming of a preprogrammed memory location is limited
to the text on the piston. For example, it is not advisable to program
a pianissimo registration under the tutti piston.
1. Check that the key switch is to the right.
2. Select the desired stops.
3. Push the SET piston in. Hold the piston down.
4. Press the desired preprogrammed memory location (PP-T) in.
5. Release the preprogrammed memory location piston (PP-T).
6. Release the SET piston.
The Easy Menu is an operating system whose settings can be read on the
display. The Easy Menu is operated with the - and + pistons, the SET and
the MENU pistons.
The functions in the Easy Menu can only be selected when the
memory lock is open. This can be seen on the SET piston. If this is
not lit, the memory lock is closed.
The Easy Menu consists of the following functions:
Capture memory
General volume
Transposer
Tuning Mode
Temperaments
Keyboard Mode
Reset Procedures
Data Dump
Demo Songs
Standard Intonation