Transposer - Johannus Opus 15 User Manual

4.11.3

Transposer

18
The Transposer function shifts the pitch by half-tone increments (from -8 to
+8). The set pitch can be read on the display (Tr:..).
The pitch can only be programmed when the TRANS. piston is lit.
Changing the transposer
1. Push the TRANS piston in.
2. Use the - and + pistons to set the pitch.
The pitch shift is not stored in memory. When the organ is switched
on again, the most recently programmed pitch will be active.
Programming the transposer
1. Push the TRANS piston in.
2. Use the - and + pistons to set the pitch.
3. Push the SET piston in.
The pitch shift is stored in memory.. When the organ is switched
on again, the programmed pitch will be active.