Chain Dialing - Uniden D1880 Series User Manual

D1880 series
Table of Contents

Advertisement

Privacy Mode
To activate privacy mode on a call in progress, press
As long as privacy mode is on, you'll see a in the display, and no other
handsets can join your call. Privacy mode turns off automatically when
you hang up; you can also turn it off by pressing
Handset to Handset Intercom
• Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
• You can make an intercom call from any handset, but only two handsets
can be in an intercom call at any time.
• If an outside call comes in during an intercom page, the phone cancels
the page so you can answer the incoming call.
• If an outside call comes in during an intercom call, press
hang up the intercom call and answer the outside call.
To...
make an intercom
page
cancel a page
answer a page
end an intercom call

Chain Dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 20 digits) into the phonebook just like
a regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press
MEnu/sElEcT
the phonebook.
Press...
inTErcoM/clEar.
with, or
All
to page all handsets at the same time.
.
End
inTErcoM/clEar
. Both handsets return to standby.
End
to send the code. If you change your mind, just close
MEnu/sElEcT
MEnu/sElEcT
Select the handset you want to talk
or
.
Talk/flash
twice.
twice.
to
Talk/flash
English - 13

Advertisement

Table of Contents
loading

Table of Contents