Table of Contents
Advertisement
* Total time: including the normal water filling time, drain time.
* Spin time: the time from intermittent running to finishing.
* The normal and jeans automatic programs can be fitted with soak procedure selection. After water inlet,
it will first soak for 15-45 minutes, then do washing, rinsing and spinning.
* If quick procedure is selected, the machine will set the complete washing program of water level, wash, rinse, spin automatically.
Push the RESERVE button to select the suitable reserve program
When the power is switch on, the RESERVE program is disabled automatically. If you need to finish the washing in reserved time,
please push the reserve button to select suitable
Confirm the reserve program
When the reserve program is started, the digital tube will display
the finishing time of the reserve washing.
To change the running program or cancel reserve, you shall
switch off the power and make new selection.
The water inlet pressure and water level can influence the finishing time of washing.
Push the START/PAUSE button
5 close the lid
Excluding during soak, wash, filling water procerdure,If you open
the top lid, the machine will stop working and alarm before spinning.
program.Refer to the RESERVE button in Page 10.
Page10
6 finish washing
Using process
Using process
RESERVE
Minute Remained
Hour reserved
The washing will finish about 18 hours later.
16 hours later, finish wash
START
PAUSE
When the washing is finished, the power
will be switched off automatically.
After Finishing wash
alarm automatically
Advertisement
Table of Contents
