Haier DWE-3120A User Manual page 14

Steps of using the operation buttons and description
of the steps
HWM120-01
Push the POWER ON/OFF button to switch on the power.
Push the PROGRAM button to select the suitable automatic program.
After switching on the power, the machine will set to standard program automatically. To select other program, push the
PROGRAM button till the corresponding indicator is on. Refer to the PROGRAM button in Page 11.
For an example: select quick wash for the quick washing of the laundries with light dirt.
Push PROCESS button to select suitable procedure
After switching on the power, the machine will set to WASH-RINSE-SPIN program automatically. That is the most
common program. To select other program, push the PROCESS button to select one or more procedures
among SOAK WASH RINSE SPIN .
PROCESS
Refer to the METHOD for the selection.
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the SOAK program
for the woolen laundries.
Wash the laundries that are prone to lose colors
separately from other laundries.
while washing soft laundries such as silk stockings and textile ,
please put into a wash net which can get by shoppong.
WATER
RESERVE PROCESS PROGRAM
START
LEVEL
PAUSE
Using process
Using process
POWER
ON/OFF
POWER
ON/OFF
PROGRAM
Page 11
PROCESS
Page 9