Haier DWE-3120A User Manual page 15

Selection method of the procedure programs
Times of pushing
Selected procedure
the PROCESS
program
button
Wash, rinse, spin
(standard program)
Wash (the washing liquid
remains in the tub)
Wash (the rinsing liquid
remains in the tub)
Rinse, spin
Spin
(spin after drain)
soak wash, rinse, spin
If you push the PROCESS button for 6 times, it will resume the initial mode, and it will circulate in that way.
The soak program can be used as fitting of the standard/jeans automatic programs.
It will do soaking with intermittent stirring of pulsator.
After the washing machine starts working, you can only make selection during wash , and cannot make selection
during other procedures.
Push the WATER LEVEL button to selection suitable water level
When the power is switched on, you need to set the suitablewater level by yourself.
Refer to the water level water quantity and selection of powder in Page 9
and water level in Page 10 for the selection.
Time list of each program (minute)
Program water level
1~12
Standard
Jeans
1~12
Gentle
1~12
Quick
About 4
Applicable procedure
When the common laundries need
washing , rinsing and spinning
Repeat using the washing liquid
Repeat using the rinsing liquid
When the laundries need rinsing and
spinning after hand washing
When the laundries only need spinning
after hand washing(first spin then drain)
If the laundries are very dirty, or the sleeve
and collar are dirty, first soak then wash
Wash (min) Rinse (min/time)
10~15 Rinse twice , each about 4
Rinse with water inlet twice,
10~15
each about 4
Rinse twice , each about 4
About 3
Rinse once , each about 2
About 3
Using process
Using process
Contents (the lighted indicators
indicate the programs about to run)
Soak Wash
Soak Wash
Soak Wash
Soak Wash
Soak Wash
Soak Wash
Page 9 Page10
Spin (min)
About 6
About 6
About 2
About 2
Rinse Spin
Rinse Spin
Rinse Spin
Rinse Spin
Rinse Spin
Rinse Spin
WATER
LEVEL
Total time (min)
40~53
40~54
About 24
About 15