Haier XQSB60-JN User Manual page 14

b.Steps of using the operation buttons and description
of the steps
No Washing Powder
Disinfect
NO WASHING POWDER SOAK
1.Push the "POWER ON/OFF " button to switch
on the power.
2.Push the "PROGRAM" button to select
suitable automatic program
After switching on the power, the machine will set common program automatically. To select other
automatic program, push the "program" button till the relative indicator is on. Refer to the "program
button" on Page 11 for the selection.
For instance: select "posthaste"program for laundries with small
quantity and light soil.
In selecting the common, standard program,
the machine will execute fuzzy program to select
water and wash time according to the cloth and
weight of the laundries. The full procedure is
controlled automatically.
3.Push the "NO WASHING POWDER " button to select suitable function.
Push the "no washing powder " button till the relative indicator is on. Refer to the "program" button
on page 10 for the selection.
When"No washing powder" indicator lamp is not on it is the
program for using the washing powder.
4.Push the "SOAK" , "WASH", "RINSE", "SPIN"
button to select suitable procedure.
WASH
RINSE SPIN
T ime remained
(minutes)
STANDARD
COTTON
SILK
GENTLE
Reserve
(hours later)
WATER LEVEL RESERVE
PROGRAM
STANDARD
COTTON
SILK
GENTLE
12
COMMON
QUICK
POSTHASTE
JEAN
START
POWER
PAUSE ON/OFF
POWER
ON/OFF
PROGRAM
Page 11
COMMON
QUICK
POSTHASTE
JEAN
WASH
SOAK RINSE SPIN