Playable Disc/File Types - JVC CA-NXG7 Instructions Manual

Playable Disc/File Types

DIGITAL VIDEO
• CD-R/-RW: Recorded in the Audio CD, Video
CD, and SVCD formats. MP3, WMA, WAV,
JPEG, MPEG-1, MPEG-2, ASF and DivX files
written in accordance with the "ISO 9660" format
can also be played.
• DVD-R/-RW, +R/+RW: MP3, WMA, WAV,
JPEG, MPEG-1, MPEG-2, ASF and DivX files
written in the UDF-Bridge format can be played.
• DVD-R/-RW: Recorded in the DVD Video
format and the DVD Video Recording (VR)
format.
• +R: Recorded in the DVD Video format.
• DVD-ROM: MP3, WMA, WAV files.
• USB mass storage class device: MP3, WMA,
WAV, JPEG, MPEG-1, MPEG-2, ASF and DivX*
files.
In addition to the above discs/files, this System can
play back audio data recorded on CD-Extra and CD-G
(CD-Graphics).
• The following discs cannot be played back:
DVD-RAM, CD-I (CD-I Ready), CD-ROM, and
Photo CD.
Playing back these discs will generate noise and
damage the speakers.
• CD Text and DVD Text can be played, but Text
information will not be shown on the display.
• It is possible to play back finalized +R/+RW discs.
• "DVD Logo" is a trademark of DVD Format/Logo
Licensing Corporation.
• This System can play back EVERIO file (see page 48)
recorded on DVD, CD*, and USB mass storage class
device*.
* Only when the maximum bit rate is less than 2 Mbps.
3
text_EN_NXG7G3.indb 3 text_EN_NXG7G3.indb 3
COMPACT
SUPER VIDEO
DIGITAL AUDIO
About color system
This System accommodates both NTSC and PAL
system and can play back discs/files recorded in either
system.
To change the color system, see page 7.
Note on Region Code
DVD players and DVDs have their own Region Code
numbers. This System can play back only DVDs with
an appropriate Region Code number.
• For details, see page 55.
• "REGION ERR" appears if DVD with a wrong
Region Code is loaded.
Ex.: For Southeast Asia
Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of the Non-DVD side of a DualDisc
in this product may not be recommended.
IMPORTANT: Before playing a disc/file, make sure
of the following...
• Turn on the TV and select an appropriate input
mode on the TV to view the pictures or on-screen
displays.
• For disc/file playback, you can change the initial
setting to your preference. See "Setup Menu
Operations" on page 45.
If " " appears on the TV screen when you press
a button, the disc/file cannot perform the operation
you have tried to do.
• When playing a multi-channel encoded software, the
System properly converts the multi-channel signals
into 2 channels, and emits the downmixed sound
from the speakers. To enjoy the powerful sound of
these multi-channel encoded software, connect a
proper decoder or an amplifier with a proper built-
in decoder to the OPTICAL DIGITAL OUTPUT
terminal on the rear.
How to cancel the demonstration
Press and hold DEMO button on the main unit
(until "DEMO CLEAR" appears on the display)
while on standby.
• Refer to the attached sheet "Information about the
demonstration function."
08.6.25 2:21:51 PM 08.6.25 2:21:51 PM