HP ProLiant ML310 Generation 2 Quickspecs page 7

QuickSpecs
Standard Features
Power Supply Power Supply Power Supply Power Supply
System Fans System Fans System Fans System Fans
Required Cabling Required Cabling Required Cabling Required Cabling
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
350 Watts, PFC (Power Factor Correcting)
1 - Non-hot plug, Non-redundant system fan
NOTE: Does not include fans in CPU heatsink or power supply. NOTE: NOTE: NOTE:
For required cabling information, refer to the Web site at
http://h18000.www1.hp.com/products/servers/ProLiantML310/.
Microsoft Windows Server 2003 (Standard & Web Edition)
Microsoft Small Business Server 2003
Microsoft Windows 2000 Server
Novell NetWare
Linux (Red Hat, SuSE, and UnitedLinux)
VMware Virtualization Software
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS NOTE: NOTE: NOTE:
Support Matrix at: http://www.hp.com/go/supportos
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant ML310, please see: NOTE: NOTE: NOTE:
http://h18023.www1.hp.com/support/files/server/us/index.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web NOTE: NOTE: NOTE:
site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE: NOTE: For more complete and up-to-date information on how to buy server operating systems from HP NOTE: NOTE:
please visit the OS product site at:
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware NOTE: NOTE: NOTE:
Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html
Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION: CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE NOTE NOTE NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html.
DA - 12168 North America — Version 28 — March 24, 2006
HP ProLiant ML310 Generation 2 (G2) HP ProLiant ML310 Generation 2 (G2) HP ProLiant ML310 Generation 2 (G2) HP ProLiant ML310 Generation 2 (G2)
http://h18004.www1.hp.com/products/servers/software/OEM.html
Page 7