Amped Wireless R20000G User Manual page 77

R20000G
Troubleshooting: Wireless Issues
I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the wireless
router.
a. Step back at least 10 feet from the High Power Router and check your signal again. The High Power
Router emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal
reading at close range. The speed and signal are at 100%, however your readout may not be
displaying the data correctly.
b. Change the wireless channel on the High Power Router to 11 or 1 and try again (2.4GHz). There may
be interference in your installation environment. For 5.0GHz networks change the channel to another
available channel number.
I am not getting a strong wireless connection from all distances from the wireless router.
a. Check to see that your antennas are secured tightly to the High Power Router.
b. Check if other computers are experiencing the same issue. If not, the wireless adapter in your
computer may be experiencing problems or maybe older and have poor wireless performance.
c. Avoid placing the High Power Router near or around Microwaves and 2.4GHz wireless phones.
d. Avoid using wireless channels that are crowded. Change the wireless channel on the High Power Router.
USER'S GUIDE
76