Table of Contents
Advertisement
The method of the program
The indicator
light
SOAK
Cycle
WASH
STRONG
Attention
Even there's no water in the tub, the spinning will
start after a certain period.
Do not use the "soak" program for the woollen
laundries.
Wash the laundries that are prone to lose colours
separately from other laundries.
To wash thin laundries such as the stocking, silks
etc., please put them into washing bag (which is
selectable part).
8 Push the "star t/pause" button
After the power is switched on, push it to start the machine
During working, push it to pause working.
During pause, push it to resume working.
When in pause,
the indicator light which is flashing will be light only.
Press the Start/Pause button,
Attention: If you have pushed the Start/Pause button, you will select only during the
soaking or washing.
If you want to select during other cycle, you must switch off the power for
more than 3s, then switch on the power to select again.
It will drain water for set time only when there is water in the tub; if there is
no water in the tub, it will drain water for 10 seconds, then turn to the next cycle.
When running the rinsing cycle, it will rinse twice, but when rinsing in
the gentle cycle ,it will rinse only once.
9 The washing is finished
indicator light
the indicator light will flash.
The power will be switched off automatically
after the finishing of the washing.
Using process
Using process
Only washing without draining water.
Soak Wash Rinse Spin
Wash Rinse Spin
Gentle Rinse Spin
Drain water only spin
It beeps to indicate
the finishing of
washing
Advertisement
Table of Contents
