Honda 2006 CB600F Owner's Manual page 81

Parking
LEFT SIDE
(4)
(3)
(2) helmet holder wire
(3) D-ring
4. Use the helmet holder wire stored in the
tool kit to secure your helmet with your
motorcycle:
Remove the seat (page
Route either end of the helmet holder
wire ( ) through the helmet's D-ring 2
( ). 3
72
Basic Operation & Riding
(2)
(4) helmet holder
98 ).
Hook the loops of the wire onto the
helmet holder ( ) and lower the seat 4
to lock.
Remove the helmet holder wire and
store it in the tool kit when it is not used.
Riding with a helmet attached to
the holder can interfere with the
rear wheel or suspension and
could cause a crash in which you
can be seriously hurt or killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.