Honda 2006 CB600F Owner's Manual page 199

If You Have a Flat Tire
Installation
1. Position the wheel between the fork
legs and insert the front axle shaft from
the left side, through the left fork leg
and wheel hub.
2. Align the index line ( ) of the front
axle shaft with the recessed surface ( )
of the fork leg.
LEFT FRONT
(6) index line
(7) surface
190
Taking Care of the Unexpected
6
7
(6)
(7)
3. Tighten the front axle pinch bolt on the
left fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
4. Tighten the front axle bolt to the
specified torque:
43 lbf·ft (59 N·m , 6.0 kgf·m)
5. Install the brake caliper assemblies onto
the fork legs.
To avoid damaging the brake pads
while installing the brake caliper
assembly, carefully fit the brake disc
between the pads.
6. Install the caliper fixing bolts and
tighten to the specified torque:
22 lbf·ft (30 N·m , 3.1 kgf·m)