If a Fuse Blows
Main Fuse Access:
2.
To access the main fuse ( ), remove
the right side cover (page
RIGHT SIDE
(3)
(2)
(1) main fuse
(2) starter magnetic switch
(3) wire connector
(4) spare main fuse
3.
Disconnect the wire connector ( ) of
the starter magnetic switch ( ).
200
Taking Care of the Unexpected
1
99
).
(1)
(4)
3
2
4.
Pull the fuse out. If the main fuse is
blown, install a new main fuse.
The spare main fuse ( ) is located near
the starter magnetic switch.
5.
Reconnect the wire connector.
6.
Install the right side cover.
4