Gauges, Indicators & Displays
4.
The preset figure is displayed and the
third digit will be flashing.
5.
To set the third digit, press the reset
switch until the desired third digit
appears.
Quick setting
reset switch until the desired third
digit appears.
30
Instruments & Controls
press and hold the
6.
Press the select switch ( ) when the
display reaches the desired figure.
The second digit will be flashing.
(3)
(3) select switch
7.
Repeat steps 5 and 6 for the second and
first digits.
If the ignition switch is turned OFF or no
operation is performed for 30 seconds
during the adjustment mode, the set digits
will reset.
3