Lamp Check
The malfunction indicator lamp (MIL)
comes on when you turn the ignition
switch ON so you can check that it is
working. The indicator remains on until
after the engine is started.
When applicable, the high beam and
neutral indicators come on when you turn
the ignition switch ON and remain on until
you select the low beam or shift out of
neutral.
These indicators are identified in the table
on page
17
with the words:
Gauges, Indicators & Displays
Lamp Check.
If one of these indicators does not come
on when it should, have your Honda dealer
check for problems.
Meter Check
The tachometer needle will swing to the
end of the red zone once when you turn
the ignition switch ON.
The meter is identified in the table on page
18
with the words:
If the tachometer needle does not swing to
the end of the red zone when it should,
have your Honda dealer check for
problems.
Instruments & Controls
Meter Check.
15