Honda 2006 CB600F Owner's Manual page 163

Honda cb600f 599
Hide thumbs Also See for 2006 CB600F:
Table of Contents

Advertisement

Drive Chain
Lubricate only with SAE 80 or 90 gear oil.
Commercial chain lubricants may contain
solvents which could damage the rubber
O-rings.
Removal, Cleaning &
Replacement
Refer to
Saf ety Precautions
Your motorcycle has an endless (riveted
master link) type chain. It should only be
removed or replaced by your Honda dealer.
The O-rings can be damaged by steam
cleaning, high pressure washers, and
certain solvents.
154
Servicing Your Honda
on page
82
.
1.
Clean the side surfaces of the chain
with a dry cloth. Use a high flashpoint
solvent such as kerosene
gasoline.
Do not brush the rubber O-rings.
Brushing will damage them. Use of a
solvent may also damage the O-rings.
2.
Inspect the drive chain for possible
wear or damage.
Replace the drive chain if it has damaged
rollers, loose fitting links, damaged
O-rings, or otherwise appears
unserviceable.
Replacement Chain:
D.I.D. 525VM2
or
RK 525RO
not

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2006 cb600f 599

Table of Contents