Seat Removal
Refer to
Saf ety Precautions
The seat must be removed to access the
helmet holder, color label and emission
label.
Removal
1.
Open the left saddlebag (page
2.
Pull the lever ( ) and up the seat ( ) to
1
unlock the seat catch ( ). Then pull the
seat to back side.
3.
Remove the fuel tank rubber ( ).
To avoid possible damage to the seat, do
not drag or hit the seat.
Installation
1.
Install the fuel tank rubber.
2.
Insert the front prong ( ) into the recess
( ) under the frame and the rear prongs
6
94
Servicing Your Honda
on page
78
.
46
).
2
3
4
5
( ) into the rear stays ( ) on the frame.
7
3.
Then push down on the rear of the seat.
Close the left saddlebag (page
Be sure the seat is locked securely in
position after installation.
(5)
(2)
(4)
(6)
(8)
(1) lever
(2) seat
(3) seat catch
(4) fuel tank rubber
8
47
).
(7)
(3)
(1)
(5) front prong
(6) recess
(7) rear prongs
(8) rear stays