Changing The Mileage And Fuel Mileage Unit - Honda 2010 NT700V Owner's Manual

Changing the Mileage and
Fuel Mileage Unit
The odometer/tripmeter can also display
''mile'' or ''km''.
The current fuel mileage and the average
fuel mileage can display ''mpg'' or
''km/ ''.
1. Turn the ignition switch ON.
2. Press and hold the SET button for more
than 4 seconds.
3. Press the SEL button to select ''mile''/
''mpg'' or ''km''/''km/ ''.
4. To end the selection, press the SET
button.
Gauges, Indicators & Displays
The display will stop blinking
automatically if the button is not pressed
for about 30 seconds.
As you turn off the ignition switch during
the presetting procedures, the preset data
just before turning off the ignition switch
will be registered.
Instruments & Controls
27