Honda 2010 NT700V Owner's Manual page 21

Gauges, Indicators & Displays
Lamp Check
The low oil pressure indicator, turn signal
indicators, high beam indicator, neutral
indicator and PGM-FI malfunction
indicator lamp (MIL) come on when you
turn the ignition switch ON so you can
check that they are working. The low oil
pressure indicator remains on until after
the engine is started. The high coolant
temperature indicator and PGM-FI
malfunction indicator lamp (MIL) light
for a few seconds and then go off when
you turn the ignition switch ON. These
indicators are identified in the table on
pages 17 21 with the words:
Check.
14
Instruments & Controls
(NT700VA only)
The Anti-lock Brake System (ABS)
indicator comes on when you turn the
ignition switch ON. This indicator goes
off after you ride the motorcycle at a
speed above 6 mph (10 km/h).
If one of these indicators does not come
on when it should, have your Honda dealer
check for problems.
Lamp