Table of Contents
Advertisement
Changing Oil
Refer to
Saf ety Precautions
LEFT REAR
(4)
(1)
(1) oil drain bolt
(2) oil filler cap
(3) sealing washer
(4) oil filler hole
on page
78
.
(2)
(3)
Final Drive Oil
Change the oil with the final drive at
normal operating temperature to assure
complete and rapid draining.
1.
Place the motorcycle on its center stand
on a firm, level surface.
2.
Place a drain pan under the oil drain
bolt ( ).
1
Remove the oil filler cap ( ), oil drain
3.
bolt and sealing washer ( ).
4.
After the oil has completely drained,
check that the sealing washer is in good
condition. Reinstall the oil drain bolt
with its sealing washer (or a new
washer, if necessary) and tighten it to
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
Servicing Your Honda
2
3
(cont'd)
121
Advertisement
Chapters
Table of Contents
