Restoring The Machine To The Factory Settings; Initializing Using The Machine's Operation Panel - Canon MP980 Series Network Setup Manual

Restoring the Machine to the Factory Settings

1

Initializing using the machine's Operation Panel

Follow these steps to restore the machine's network settings to factory defaults.
Open the Operation Panel on the machine, use the Easy-Scroll
a
Wheel or the [ or ] button to select Settings, then press the
OK button.
Select Device settings and press the OK button.
b
Select LAN settings and press the OK button.
c
Select Reset LAN settings and press the OK button.
d
8
Select Yes and press the OK button.
e
Confirm that the right screen appears.
f
After a while, the LAN settings screen returns.
The machine's network settings are restored to factory defaults.
Factory Default
Wireless LAN Active
SSID BJNPSETUP
Data encryption Disable
DHCP Client • IP address: 192.168.1.123 (default)
(Obtain an IP address
• Subnet mask: 255.255.255.0
automatically)
• Default gateway: 0.0.0.0
Wired LAN Inactive
DHCP Client • IP address: 192.168.1.123 (default)
(Obtain an IP address
• Subnet mask: 255.255.255.0
automatically)
• Default gateway: 0.0.0.0