Restoring the Machine to the Factory Settings
1
Initializing using the machine's Operation Panel
Follow these steps to restore the machine's network settings to factory defaults.
Press the Menu button, use the [ or ] button to select Settings,
a
then press the OK button.
Select Device settings and press the OK button.
b
Use the { or } button to select LAN settings, then press the
c
OK button.
Select Reset LAN settings and press the OK button.
d
8
Make sure that Yes is selected and press the OK button.
e
Confirm that the right screen appears.
f
After a while, the LAN settings screen returns.
The machine's network settings are restored to factory defaults.
Factory Default
Wireless LAN
Active
SSID
BJNPSETUP
Data encryption
Disable
TCP/IP settings
Obtain an IP address automatically
•
IP address: 192.168.1.123 (default)
•
Subnet mask: 255.255.255.0
•
Default gateway: 0.0.0.0
Wired LAN
Inactive
TCP/IP settings
Obtain an IP address automatically
•
IP address: 192.168.2.123 (default)
•
Subnet mask: 255.255.255.0
•
Default gateway: 0.0.0.0