Connecting The Gas - Dacor Epicure OB36 Installation Instructions Manual

Connecting the Gas
Gas Connection - Natural Gas
NOTE
Units equipped for use With natural gas ship with
regulator assembly with 3/4'i pipe attached and an
additional 3/411nipplel
, The regulator assembly is also equipped with a 3/4,! to
1/2,! reducer on the inlet side:
,
,
3.
Connect the factory supplied regulator assembly to the
gas inlet at the back right bottom corner of the appli-
ance. Make sure the arrow on the regulator points in
the direction of the gas flow (towards the grill).
Connect a 1/2" nipple to the regulator.
Install an approved flexible gas line from the regulator
to the gas shut-off valve.
Natural Gas
Connection
Regulator assembly _1
(included PN 700597NG) _
1/2" Nipple (not included) _ _
F.ex. .e ..ne.
Gas Connection
1.
- Whole House LP Gas
Connect the LP regulator assembly (special order from
Dacor) to the gas inlet at the back right bottom corner
of the appliance. Make sure the arrow on the regulator
points in the direction of the gas flow (towards the grill).
2. Connect a 1/2" nipple to the regulator.
3. Install an approved flexible gas line from the regulator
to the gas shut-off valve.
Whole House LP
Gas Connection
Regulator assembly _1
(special order PN 700597LP)_ _
1/2" Nipple (not included)_ _
F.ex. .e ..he.
Gas Connection - LP Gas Cylinder Hose
1. Connect the supplied 3/4" coupling and nipple to the
gas inlet at the back right bottom corner of the unit.
2. Connect the included LP cylinder hose to the nipple.
3/4" Coupling and
nipple (included)
Connect
to outdoor grill
t t
--8
t t
t t
LP regulator and hose !
assembly (included)
PN 72310 for OBSB162, PN 101578 for
LP Cylinder Hose Connection
14 c_acar