Ap Mode; Switch To Ap Mode - Sapido RB-1602 User Manual

The default values for User Name and Password are admin (all in lowercase letters). Click
Login to enter.
4.2

AP Mode

Under AP Mode, the SAPIDO Light N+ Broadband Router supports 2 LAN ports as Bridge,
and user can connect to this Router via LAN port and provide the lower level wired or wireless
internet connections. NAT function is disabled under AP mode. The SAPIDO Light N+
Broadband Router connects the upper level device only through the Ethernet port and gets its
assigned IP address. If not, the SAPIDO Light N+ Broadband Router will use the default IP or
assigned by the user.
4.2.1

Switch to AP Mode

Switch to AP mode and plug in power.
Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds
between power-off / power-on condition.
2. Switching the mode while power is on will make the router crush, and cause the hardware damage and
information lost.
http://www.sapido.com.tw/
29
User Manual 1.0