Change Password; Upgrade Firmware - Sapido RB-1602 User Manual

6.3.1

Change Password

Users can set or change their password in this section.
1. New Password
Enter the new password you want to change.
2. New Password (Confirm)
Enter the new password again for confirming.
3. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the
input data.
Note: 1. Only the password can be changed, the user name for administrator is admin and not to be changed.
2. If you forget administrator's password, please reset 11N WLAN Mobile Server Router to default setting by
pressing the "Reset" button on the rear panel over 5 seconds. And the password will return to admin.
6.3.2

Upgrade Firmware

There is certain risk while upgrading firmware. Upgrading firmware is not recommended
unless the significant faulty is found. You can upgrade the firmware of SAPIDO Light N+
Broadband Router on this page. Make sure the firmware you want to use is on the local hard
drive of the computer. Click Upgrade Firmware to proceed.
http://www.sapido.com.tw/
111
User Manual 1.0