Wifi Ap Mode- Using As A Wireless Ap - Sapido RB-1632 User Manual

Item
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Static DHCP
Device Name
802.1d Spanning Tree
Clone Mac Address
Apply Change & Reset
3.4

WiFi AP Mode- Using as a wireless AP

Make sure to shift the mode into AP Mode.
The default values for User Name and Password are admin (all in lowercase letters). Click
http://www.sapido.com.tw/
Description
The default IP address is 192.168.1.254
Enter the Subnet Mask address.
Enter the Default Gateway address for LAN interfaces.
Select DHCP type: Client, Disable, or Server under different
environment.
When enable DHCP server, you can fill in the start and end IP
address; client will be assigned an IP address from the range.
When enable DHCP server, you can set static DHCP to a network
device with specified MAC address.
Input a name for this router.
Disable or Enable the 802.1d Spanning Tree Protocol (STP).
Some ISPs require MAC address registration. In this case, enter
the MAC address registered to the provider to "Clone MAC
Address".
Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.
33 User Manual 1.0