Table of Contents
Advertisement
Chapter3 AP Mode
Connect to AP or wired Internet, and then provides wired and wireless internet bridge
service for bottom level users. The AP mode doesn' t support NAT. The 3.5G server
router is simply using Ethernet port to connect to the upper level device and receive
the IP address from it. The 3.5G server router will use the default IP address or is
defined by users if the upper level device does not give one.
3.1
Enter Setup Page
On Main setup page, please select "Function Setup" to configure.
Double click the icon of GR-1102 to enter the next page.
The default User Name and Password are "admin"。
SadoGO Manual V1.0
http://www.sapido.com.tw
37
Advertisement
Table of Contents
