Table of Contents
Advertisement
room Station Installation Guide
1.
use the recommended cable between all stations.
2.
determine the correct height for the Room Station/s. Typical installation height is
between 150-160cm. See figure 1.
3.
Run the cable through the bracket and mount the bracket to the wall using screws.
4.
Terminate the cable at the monitor following the relevant wiring diagram in this
manual.
usually installation height is between
5.
Fit the Room Station on the bracket. See Figure 2.
FIg. 1
19
MONITOR INSTALLATION GUIDE:
Installation Instructions:
Please select relevant wire diagram for your chosen
Make sure you use correct cable for system required
Single Monitor Installations:
Select correct height of indoor monitor
150~160CM See below Figure 1
After determine the monitor bracket position and
locating screws in bracket.
Finally, install the indoor monitor on the wall as belo
fix
FIg. 2
13
usua
19
Advertisement
Table of Contents
