Table of Contents
Advertisement
3 Press the "WATER LEVEL" button to select suitable
water level
After switching on the power, press the button "WATER LEVEL" to select a water level according
to the load. Please refer to the button " Water level" on page 10.
4 Push the "
PROGRAM/DELAY TIME
to select suitable reserve program
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
"
PROGRAM/DELAY TIME
"
Refer to The button of
Confirm the delay time program
"Delay time"
When
displays the time to the end of the delay time wash cycle, and
the indicator turns on.During delay time procedure,push the
"Delay time"
button to display the delay time mode.
To change the running program or cancel the delay time,
you should cut off the supply and reselect.
5 Press the "start/pause" button
Close the top lid
Except water filling ,washing,rinsing and draining, if the top
cover is opened, the washing machine will stop running and
alarm.
Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
"
button over 2 seconds to set a delay time wash program.
"
PROGRAM/DELAY TIME
becomes active, the nixie tube
13
Page 10
" button
on page 10.
Page 10
the washing will finish
about 18 hours later
START
PAUSE
WATER LEVEL
PROGRAM
DELAY TIME
START
PAUSE
Hide quick links:
Advertisement
Table of Contents
