Haier HWM60-10 User Manual page 13

Use the operation buttons
b. Operating procedure and explanations for the
buttons
PROGRAM STATUS PROCEDURE STATUS
STANDARD
JEANS
GENTLE
QUICK WASH
WASH
SPIN
1 Press the "POWER ON/OFF" button to switch on
the power supply
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.
2 Press the button of"
select a suitable full-automatic program
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button "
indicator on. Refer to the "Button of "
paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles.
When "standard" program is selected, the washing machine will perform full-automatically
controlled fuzzy program to set water level, water flow and wash duration according to the
cloth nature and weight
If there is water inside the tub,the machine cannot detect the laundries and will display
middle level.If wet laundries are put in,it may display high level.You must set suitable water
level by yourself.
SOAK
WASH
RINSE
SPIN
PROGRAM
WATER LEVEL
DELAY TIME
PROGRAM/DELAY TIME
PROGRAM/DELAY TIME
PROGRAM/DELAY TIME
11
START
PAUSE
POWER
ON/OFF
" to
PROGRAM
DELAY TIME
" to get the corresponding
"
Page 10
POWER
ON/OFF