Table of Contents
Advertisement
CHECKING AND SETTING THE VALVE TIMING
Lock the engine flywheel, using tool [6].
Slacken:
- The accessories drive pulley (8).
- The screw (17) of the tensioner roller (18).
Fit the tool [1].
Turn the tensioner roller, using tool [2], to attain a tension of:
Tighten screw (17) of the tensioner roller (18) to 2,5 ± 0,2 m.daN.
Remove tool [1].
Fit tool [1].
The tension value should be:
ESSENTIAL: If the value is incorrect, recommence the operation.
Remove tools [1], [3], [5] and [6].
Rotate the crankshaft two times in the normal direction of rotation.
Peg:
- The crankshaft, using tool [3].
- The camshaft drive pulley.
IMPERATIVE: If the pegging is not possible, recommence the operation.
B1EP1ACC
Engines: RHY - RHZ
N° RPO 9128 #
54 ± 2 SEEM units.
54 ± 3 SEEM units.
223
XSARA - XSARA PICASSO
Hide quick links:
Advertisement
Table of Contents
