CITROEN C2 2004 User Manual page 128

AUXILIARY EQUIPMENT DRIVE BELT
C3
Engine: KFU
Vehicle With air conditioning.
Removing.
Slacken the tension, screw (6), screw (4) and screw (5).
Completely detension the belt by acting on the tensioner roller.
Remove the auxiliary equipment drive belt.
Refitting.
Refit the auxiliary equipment drive belt.
Respect the following sequence :
- Crankshaft pinion, aircon compressor pulley, alternator pulley guide roller and guide roller.
- Position tool [2] on the belt. Tighten the screw (5) to tension the belt to
120 ± 3 SEEM units.
Tighten screw (4), screw (6).
Remove tool [2].
Complete the refitting in the opposite order to removal.
B1BP10VC B1BP10XC
124