Table of Contents
Advertisement
C3
CHECKING AND SETTING THE VALVE TIMING
Engines: 8HY - 8HV
Checks (continued).
Refit the screw (8).
Rotate the crankshaft six times (clockwise).
IMPERATIVE: Never rotate the engine backwards.
Peg:
- The camshaft, using tool [2] (oil the pegs).
- The fuel high pressure pump pulley (14), using tool [3] at «c».
WARNING: The magnetic track should show no signs of damage and should not be
approached by any source of magnetism.
Peg the crankshaft at «b», using tool [3].
IMPERATIVE: Should it be impossible to peg the camshaft, check that the
offset between the hole in the camshaft pinion and the pegging hole is not
greater than 1 mm.
Otherwise repeat the operation to position the timing belt (see corresponding
operation).
B1EP18YD
194
Hide quick links:
Advertisement
Table of Contents
