Table of Contents
Advertisement
AUXILIARY EQUIPMENT DRIVE BELT
[1a] Dynamic tensioner roller lever
[1b] Lever extension
[2] Accessories belt roller locking peg Ø 4 mm
Removing.
Pivot the tensioner roller support (1) (clockwise), using tools [1a] and [1b] at «a».
Remove the belt.
Immobilise the support (1) of the tensioner roller, using tool [2].
Remove the auxiliary drive belt (2).
IMPERATIVE: Ensure that the tensioner rollers turn freely (no play, no tight spot).
Refitting.
Refit the belt.
Move the tool [1] on the tensioner roller to remove the peg [2].
ESSENTIAL: Make sure that the belt is correctly positioned in the various pulley
grooves.
B1BP2MYD
B1BP2MZC
139
Engines: 8HY - 8HV
Tools.
: (-).0194-E1
: (-).0194-E2
: (-).0194-F
C3
Hide quick links:
Advertisement
Table of Contents
