CITROEN C2 2004 User Manual page 209

CHECKING AND SETTING THE VALVE TIMING
B1BP304D
Engines: 9HZ - 9HY
[1] Flywheel setting peg
[2] Camshaft setting peg
[3] Crankshaft setting peg
Checking and setting the timing.
Removing.
Raise and support the vehicle, wheels hanging.
Disconnect the positive and negative terminals of the battery.
Remove:
- The front RH wheel.
- The front RH splash-shield.
- The accessories drive belt (see corresponding operation).
Uncouple:
- The fuel supply unions (1).
- The air/air heat exchanger inlet and outlet pipes (3).
- The exhaust line (at the flexible pipe).
Disconnect the connecter at «a».
Remove and move aside the power steering fluid reservoir (6).
Uncouple, plug and move aside the tube (2).
Support the engine with a roller jack equipped with a block.
Remove the engine supports (4) and (5).
205
XSARA PICASSO
Tools.
: (-).0194.C
: (-).0194.B
: (-).0194.A