CITROEN C2 2004 User Manual page 185

CHECKING AND SETTING THE VALVE TIMING
- Peg the crankshaft using the tool [3].
- Peg the camshaft pulleys using the tool [2].
NOTE: Ensure that the camshaft pulleys rotate freely on the hubs. Clean the contact faces of the pulleys and
hubs.
- Turn the camshaft pulleys in a clockwise direction to bring them to the end of the slots.
- Fit the belt (9).
- Fit the tool [1].
- Turn the roller (7) using the tool [5].
- Pre-tension to: (Pulleys slackened).
Engine
New belt
- Tighten the screws of the roller (7) to 2 m.daN.
- Fit the tool [4].
- Tighten the screws (10) to 4 m.daN.
- Remove the tools.
- Rotate the crankshaft by six turns (normal direction of rotation).
B1EP12OC B1EP121C
Engine: RFS
Pretensioning the timing belt.
RFS
55 SEEM units
181
XSARA