Advertisement
How to use the washing powder
Direct dissolved in the machine
1.Fill some water.
2.Add the power. Run for 30 seconds to dissolve it completely.
3.Put in the laundries. Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30
2.Add the powder while stirring to fully dissolve it.
It is suggested not to use high sudsing detergent.
Washing powder with poor quality or long time storage maybe caked.
Preparation before washing
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket.
there's special
Take out the
requirment for
coins , sand,
the laundries.
hairpins etc.
A.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not water absorbing, please put them into water with hands.
d.For laundries with much soil, lease remove the soil first. You can add detergent on the
part with serious soil directly. It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber, please first turn the inside out before
putting them into the water.
F.Do not put the laundries polluted with chemicals directly into the washing machine.
and a container.
Fasten
the
The quantity of
buttons and
the
laundries
zippers.
shall not exceed
the rated value.
The big laundries
like the
shall be put in
loosely.
When the pulsator
is running , the
buttons
of
the
l a u n d r i e s m a y
cause noise. For
jeans
t h e
s a k e
discretion,please
put the laundries
with buttons into
other laundries.
o f
Advertisement
